Niko single-pole control switch with 3 terminals, 10 AX/250 Vac, screwless terminals

Mechanism for a single-pole control switch with 3 connection terminals, with screw mounting. This switch can be equipped with a pilot light (see accessories for LED lighting units) that indicates whether the light is on or off. A finishing set and a faceplate in the color of your choice must be ordered separately.

This product is protected by at least one patent (application). Please see www.niko.eu/innovation for more information about patents.

Base for single-pole control switch with 3 connection terminals, 10 AX/250 Vac, screwless terminals.

• Maximum master switch rating: 16 A (limited by national installation regulations)
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact resistance of IK06
• SBL load: 100 W
• Base material
  • urea-formaldehyde (UF) with high heat resistance
  • white RAL9010 (approximate)
• Flush-mounting frame
  • metal thickness 1 mm
  • galvanized on all sides after cutting, even on the cut edges
  • with 4 grooves with a screw hole of 7 mm
  • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
• Required flush-mounting box
  • depth: min. 40 mm (incl. wiring space)
  • claw/screw mounting: 60 mm
  • inner diameter of box: 60 mm
  • multiple boxes center-to-center distance horizontal: 71 mm
  • multiple boxes center-to-center distance vertical: 71 mm
• Fixing method
  • with screws, for easy fastening in a flush-mounting box with grip surfaces
• Center-to-center distance
  • horizontal coupling and vertical coupling with center-to-center distance 71 mm
  • horizontal coupling of multiple bases is quick and perfect due to folded-up dovetails on the left and right sides
  • extra robustness due to folded-up edges on the outside of the base and the extension to the inside
• End border: 4 rectangular openings (7 x 2.5 mm) that can compensate for a gap of 1 to 1.2 mm if the flush-mounting box protrudes from the plaster, so that the faceplate can still sit perfectly against the wall
• Wire connection
  • contact sockets equipped with screwless terminals for clamping wires
• Wire stripping length
  • 8 mm wire stripping length
  • indelible marking on the back: wire stripping length and connection diagram
  • indelible marking on the front: terminal marking and switch symbol
• Lighting unit
  • the base is equipped with 2 rectangular niches for a lighting unit
  • left niche (front view): snap-in lighting unit with wires or automatic lighting unit
  • back: round recesses for direct contact of the automatic lighting unit with the mechanism
• Ambient temperature: -5 – +40 °C
• Certifications: KEMA
• Marking: CE