Niko series switch, 10 AX/250 Vac, screw terminals

Mechanism for a double pole switch, with claw fixing. A double pole switch has two buttons and can be used to switch two separate lights on or off. A finishing set and a cover plate in a colour of your choice must be ordered separately.

This product is protected by at least one patent (application). Please see www.niko.eu/innovation for more information about patents.

Base for double pole switch, 10 AX/250 Vac, screw terminals.

• Function: – switch
  • block-shaped silver contacts (cadmium-free) arranged in a cross shape
• Maximum master switch rating: 16 A (limited by national installation regulations)
• Degree of protection: IP41 for the combination of a mechanism, central plate and cover plate
• Impact resistance: The combination of a mechanism, a central plate and a cover plate has an impact resistance of IK06
• SBL load: 100 W
• Material base
  • urea-formaldehyde (UF) with high heat resistance
  • white RAL9010 (approximate)
• Flush-mounting frame
  • metal thickness 1 mm
  • galvanized on all sides after cutting, including on the cut edges
  • with 4 mounting slots with a 7 mm screw hole
  • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
• Flush-mounting depth: 18 mm
• Required flush-mounting box
  • depth: min. 40 mm (incl. wiring space)
  • claw/screw fixing: 60 mm
  • inner box diameter: 60 mm
  • multiple boxes center-to-center distance horizontal: 71 mm
  • multiple boxes center-to-center distance vertical: 60 mm
• Fixing method
  • simple fixing in a flush-mounting box with gripping surfaces
  • with claws that are opened by turning screws with a combination screw head (Pz1 or slot 1 x 5 mm), for fixing in a flush-mounting box with gripping surfaces
  • claws depth of engagement: 31 mm
  • claws can be pushed back into their original position
  • claws can be pushed out with a screwdriver
• Center-to-center distance
  • easy and quick installation of one or more mechanisms by indicating the center of the flush-mounting frame (chalk line, laser, etc.)
  • vertical coupling center-to-center distance 60 mm by sliding several bases into each other; they lock automatically
  • vertical coupling center-to-center distance 71 mm using pre-formed tabs at the bottom; by folding the tabs down by 1 mm, the bases are supported against each other and the center-to-center distance is guaranteed
  • horizontal coupling of several bases is quick and perfect thanks to folded-up dovetails on the left and right sides
  • extra robustness due to folded-up edges on the outside of the base and the indentation towards the inside
• Mounting border: 4 rectangular openings (7 x 2.5 mm) which, if the flush-mounting box protrudes from the plaster, can compensate for a gap between 1 and 1.2 mm so that the cover plate can still perfectly fit against the wall
• Wire connection
  • the contact terminals are equipped with cage clamps with captive screws with a combination screw head (Pz1 or slot 1 x 5 mm)
  • each screw has a screwdriver guide that prevents the screwdriver from slipping off the screw head
• Wire capacity
  • all connection terminals on the top of the base
  • up to 2 x 2.5 mm² wire per connection terminal
• Stripping length
  • 8 mm stripping length
  • indelible marking on the back: stripping length and connection diagram
  • indelible marking on the front: terminal marking and switch symbol
• Lighting element
  • the base is provided with 2 rectangular niches for lighting elements
  • left and right niche: clicking in lighting elements with wires
• Ambient temperature: -5 – +40 °C
• Certifications: CEBEC
• Marking: CE