Niko double-pole two-way switch, 10 AX/250 Vac, screwless terminals

Mechanism for a double-pole two-way switch, with claw fixing. Two-way switches are used to control one lamp from two different locations. A finishing set and a faceplate in the colour of your choice must be ordered separately.

Base for double-pole two-way switch, 10 AX/250 Vac, screwless terminals.

• Function: – switch
  • block-shaped silver contacts (cadmium-free) arranged in a cross shape
• Maximum master switch rating: 16 A (limited by national installation regulations)
• Protection degree: IP41 for the combination of a mechanism, a central plate and a faceplate
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact resistance of IK06
• SBL load: 100 W
• Base material
  • high-heat-resistant urea-formaldehyde (UF)
  • white RAL9010 (approx.)
• Flush-mounting frame
  • 1 mm-thick metal
  • galvanized on all sides after cutting, including on the cut edges
  • with 4 grooves with a 7 mm screw hole
  • with 4 screw holes (indicated by a screw symbol) with a 3 mm diameter for mounting on panels
• Required flush-mounting box
  • depth: min. 40 mm (incl. wiring space)
  • claw/screw fixing: 60 mm
  • internal box diameter: 60 mm
  • multi-room box horizontal center-to-center distance: 71 mm
  • multi-room box vertical center-to-center distance: 60 mm
• Fixing method
  • simple fixing in a flush-mounting box with grip surfaces
  • with claws that are opened by turning screws with a combined screw head (Pz1 or slot 1 x 5 mm), for fixing in a flush-mounting box with grip surfaces
  • claw engagement depth: 31 mm
  • claws can be pushed back into their original position
  • claws can be pushed out with a screwdriver
• Center-to-center distance
  • easy and quick installation of one or more mechanisms by indicating (chalk line, laser, etc.) the center of the flush-mounting frame
  • vertical coupling center-to-center distance 60 mm by sliding multiple bases together; they lock automatically
  • vertical coupling center-to-center distance 71 mm using pre-shaped tabs at the bottom; by folding the tabs downwards over a distance of 1 mm, the bases support each other and the center-to-center distance is maintained
  • horizontal coupling of multiple bases is quick and perfect due to folded-up dovetails on the left and right sides
  • extra robustness due to folded-up edges on the outside of the base and the inward extension
• Adjustment edge: 4 rectangular openings (7 x 2.5 mm) which, if the flush-mounting box sticks out of the plaster, can compensate for a clearance of 1 to 1.2 mm, so that the faceplate can still sit perfectly against the wall
• Wire connection
  • contact sockets equipped with screwless terminals for clamping wires
• Wire capacity
  • up to 2 x 2.5 mm² wire per terminal
• Stripping length
  • 12 mm stripping length
  • indelible marking on the back: stripping length and wiring diagram
  • indelible marking on the front: terminal identification and switch symbol
• Lighting element
  • the base is equipped with 2 rectangular recesses for a lighting element
  • left recess (front view): clicking in a lighting element with wires or an automatic lighting element
  • back: round cut-outs for direct contact of the automatic lighting element with the mechanism
• Ambient temperature: -5 – +40 °C
• Certifications: CEBEC
• Marking: CE