Niko intermediate switch, 10 AX/250 Vac, screwless terminals

Mechanism for an intermediate switch or intermediate pull switch, with claw fixing. An intermediate switch allows you to control one lamp from three or more locations. A finishing set and a faceplate in a colour of your choice must be ordered separately.

Base for an intermediate switch or intermediate pull switch, 10 AX/250 Vac, screwless terminals.

• Function: – switch
  • block-shaped silver contacts (cadmium-free) arranged in a cross
• Protection degree: IP41 for the combination of a mechanism, a central plate and a faceplate
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact resistance of IK06
• SBL load: 100 W
• Material base
  • urea-formaldehyde (UF) with high heat resistance
  • white RAL9010 (approximately)
• Flush-mounting frame
  • metal thickness 1 mm
  • galvanised on all sides after cutting, including on the cut edges
  • with 4 grooves with a 7 mm screw hole
  • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
• Required flush-mounting box
  • depth: min. 40 mm (incl. wiring space)
  • claw/screw fixing: 60 mm
  • inner diameter of box: 60 mm
  • multiple boxes centre-to-centre distance horizontal: 71 mm
  • multiple boxes centre-to-centre distance vertical: 60 mm
• Fixing method
  • simple mounting in a flush-mounting box with grip surfaces
  • with claws that are opened by means of screws with a multi-head screw (Pz1 or slot 1 x 5 mm), for mounting in a flush-mounting box with grip surfaces
  • claw engagement depth: 31 mm
  • claws can be pushed back to their original position
  • claws can be pushed out using a screwdriver
• Centre-to-centre distance
  • simple and quick mounting of one or more mechanisms by marking the centre of the flush-mounting frame (chalk line, laser, etc.)
  • vertical coupling centre-to-centre distance 60 mm by sliding multiple bases into each other; they lock automatically
  • vertical coupling centre-to-centre distance 71 mm by means of pre-formed tabs at the bottom; by folding the tabs down over a distance of 1 mm, the bases support each other and the centre-to-centre distance is guaranteed
  • horizontal coupling of multiple bases is quick and perfect by means of folded-up dovetails on the left and right side
  • extra robustness due to folded-up edges on the outside of the base and the inward step
• End border: 4 rectangular openings (7 x 2.5 mm) that can compensate for a gap of 1 to 1.2 mm if the flush-mounting box protrudes from the plaster, so that the faceplate can still sit perfectly against the wall
• Wire connection
  • contact sockets equipped with screwless terminals for clamping the wires
• Wire capacity
  • all connection terminals at the top of the base
  • up to 2 x 2.5 mm² of wire per terminal
• Stripping length
  • 12 mm stripping length
  • indelible marking on the back: stripping length and wiring diagram
  • indelible marking on the front: terminal identification and switch symbol
• Lighting element
  • the base is equipped with 2 rectangular niches for a lighting element
  • left niche (front view): snapping in a lighting element with wires or an automatic lighting element
  • back: round cutouts for direct contact of the automatic lighting element with the mechanism
• Ambient temperature: -5 – +40 °C
• Certification: CEBEC
• Marking: CE