Niko double-pole switch

Mechanism for a double-pole switch, a double-pole control switch or a double-pole pull switch, with claw fixing. A double-pole switch allows you to switch a lamp or a number of lamps connected in parallel on or off. A finishing set and a faceplate in a colour of your choice must be ordered separately.

Base for a double-pole switch, double-pole control switch or double-pole pull switch, 10 AX/250 Vac, screwless terminals.

• Function: – switch
  • block-shaped silver contacts (cadmium-free) arranged in a cross pattern
• Degree of protection: IP41 for the combination of a mechanism, a central plate and a faceplate
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact resistance of IK06
• SBL load: 100 W
• Material of base
  • urea-formaldehyde (UF) with high heat resistance
  • white RAL9010 (approximate)
• Flush-mounting frame
  • metal thickness 1 mm
  • galvanized on all sides after cutting, including on the cut edges
  • with 4 insertion slots with a screw hole of 7 mm
  • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
• Required type of flush-mounting box
  • depth: min. 40 mm (including wiring space)
  • claw/screw fixing: 60 mm
  • internal diameter of box: 60 mm
  • multiple boxes centre distance horizontal: 71 mm
  • multiple boxes centre distance vertical: 60 mm
• Fixing method
  • simple mounting in flush-mounting box with grip surfaces
  • with claws that are opened by means of screws with a combi-head (Pz1 or slot 1 x 5 mm), for mounting in flush-mounting box with grip surfaces
  • claw engagement depth: 31 mm
  • claws can be pushed back to their original position
  • claws can be pushed out with a screwdriver
• Centre distance
  • simple and quick installation of one or more mechanisms by indicating the centre of the flush-mounting frame (chalk line, laser, etc.)
  • vertical coupling centre distance 60 mm by sliding multiple bases together; they lock automatically
  • vertical coupling centre distance 71 mm by means of pre-formed tabs at the bottom; by folding the tabs downwards over a distance of 1 mm, the bases are supported against each other and the centre distance remains guaranteed
  • horizontal coupling of multiple bases is quick and perfect by means of upward-folded dovetails on the left and right sides
  • extra robustness due to folded edges on the outside of the base and the inward extension
• End border: 4 rectangular openings (7 x 2.5 mm) that can compensate for a gap between 1 and 1.2 mm if the flush-mounting box protrudes from the plaster, so that the faceplate can still sit perfectly against the wall
• Wire connection
  • contact sockets equipped with screwless terminals for clamping the wires
• Wire capacity
  • all connection terminals at the top of the base
  • up to 2 x 2.5 mm² wire per connection terminal
• Stripping length
  • 12 mm stripping length
  • indelible marking on the back: stripping length and connection diagram
  • indelible marking on the front: terminal marking and switch symbol
• Lighting element
  • the base is equipped with 2 rectangular niches for a lighting element
  • left niche (front view): snap-in of lighting element with wires or automatic lighting element
  • back: circular cut-outs for direct contact of the automatic lighting element with the mechanism
• Ambient temperature: -5 – +40 °C
• Certifications: CEBEC
• Marking: CE