Niko 2-pole switch 16A, screwless terminals

Complete flush-mounting switch (base and finishing set). The base is equipped with push-in terminals and claw fixing. This switch allows you to control one light point. Finishing colour: cream

Double-pole switch 16 A, base, push-in terminals and finishing set, cream.

• Protection degree: IP20
• Protection degree: IP41 for the combination of a mechanism, central plate and cover plate
• The combination of a mechanism, a central plate and a cover plate has an impact resistance of IK06
• Certification marks: CEBEC
• Battery: N/A
• Marking: CE

Base for a double-pole switch, double-pole control switch or double-pole pull switch, 16 AX/250 Vac, push-in terminals.

• Function: – switch
  • block-shaped silver contacts (cadmium-free) arranged in a cross configuration
• Impact resistance: The combination of a mechanism, a central plate and a cover plate has an impact resistance of IK06
• SBL load: 200 W
• Base material
  • urea-formaldehyde (UF) with high heat resistance
  • white RAL9010 (approx.)
• Flush-mounting frame
  • metal thickness 1 mm
  • galvanised on all sides after cutting, including on the cut edges
  • with 4 insertion slots with a 7 mm screw hole
  • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
• Required flush-mounting box
  • depth: min. 40 mm (incl. wiring space)
  • claw/screw fixing: 60 mm
  • internal box diameter: 60 mm
  • multiple boxes centre-to-centre distance horizontal: 71 mm
  • multiple boxes centre-to-centre distance vertical: 60 mm
• Method of fixing
  • simple fixing in a flush-mounting box with grip surfaces
  • with claws that are opened by means of screws with a multi-purpose screw head (Pz2 or slotted 1 x 5.5 mm), for fixing in a flush-mounting box with grip surfaces
  • claw engagement depth: 23.5 mm
  • claws retract fully when unscrewed
• Centre-to-centre distance
  • simple and quick mounting of one or multiple mechanisms by marking (chalk line, laser, etc.) the centre of the flush-mounting frame
  • vertical coupling centre-to-centre distance 60 mm by sliding multiple bases into each other; they lock automatically
  • vertical coupling centre-to-centre distance 71 mm by means of pre-formed tabs at the bottom; by folding the tabs downwards over a distance of 1 mm, the bases support each other and the centre-to-centre distance is maintained
  • horizontal coupling of multiple bases is quick and perfect thanks to folded-up dovetails on the left and right sides
  • extra robustness due to folded-up edges on the outside of the base and the indentation towards the inside
• Support rim: 4 rectangular openings (7 x 2.5 mm) which, if the flush-mounting box protrudes from the plaster, can compensate for a gap between 1 and 1.2 mm so that the cover plate can still fit perfectly against the wall
• Wire connection
  • contact terminals equipped with push-in terminals for clamping the wires
• Stripping length
  • 12 mm stripping length
  • indelible marking on the back: stripping length and wiring diagram
  • indelible marking on the front: terminal identification and switch symbol
• Lighting element
  • the base is equipped with 2 rectangular recesses for a lighting element
  • left recess (front view): clicking in a lighting element with wires or an automatic lighting element
  • back: circular cut-outs for direct contact of the automatic lighting element with the mechanism
• Ambient temperature: -5 – +40 °C
• Certification marks: CEBEC
• Marking: CE

Finishing set for a single switch or push button, cream. The central plate is surrounded by a flat edge which is equipped with a rectangular opening at all 4 corners, in each of which there is a multi-positional snap hook. The design of the central plate ensures that in the event of careless plastering, the cover plate can always be mounted flush against the wall thanks to the snap hooks. This works in two directions: if the flush-mounting box protrudes from the plaster, the multi-positional snap hooks compensate for a gap of between 1 and 1.2 mm; if the flush-mounting box is recessed too deeply into the plaster, the snap hooks can compensate for a gap of up to 1.8 mm. The flat edge around the central plate also contains 4 circular openings that ensure the cover plate can be positioned correctly relative to the central plate. After mounting the assembly (cover plate, finishing set and mechanism), no metal parts are visible thanks to the flat edge on the central plate.

• Function: The rocker and the middle disc (rim) form a single unit.
• Number of control buttons: 1 control button
• Central plate material: The central plate is made of dimensionally stable polycarbonate + asa. The raw material is coloured in the mass.
• Colour: cream (coloured in the mass, approx. NCS S 1005 – Y10R, RAL 1013)
• Disassembly: To disassemble the central plate, the flat edge is provided with two notches, indicated by a screwdriver symbol. Disassembly is simple and easy using a slotted screwdriver.
• Protection degree: IP41 for the combination of a mechanism, central plate and cover plate
• Impact resistance: The combination of a mechanism, a central plate and a cover plate has an impact resistance of IK06
• Fire safety

The plastic parts of the central plate are self-extinguishing (comply with a glow-wire test of 650 °C) and are halogen-free.

• Dimensions of finish with flat edge: 56 x 56 mm (HxW)

Dimensions of visible finishing part: 45 x 45 mm (HxW)

• Dimensions (HxWxD): 55.8 x 55.8 x 10.5 mm
• Certification marks: CEBEC
• Marking: CE